Free Web Hosting Provider - Web Hosting - E-commerce - High Speed Internet - Free Web Page
Search the Web



 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
     While prospecting the high deserts of Southern California during my limited vacation, I had problems with the bearings in my "old" dry washer. 
      I spent two days going to three different cities, to every parts store and bearing supply house I could find, to no Avail... 
      This is when I thought "Skateboard bearings" would be ideal because they could be found anywhere in most any town. 
 
      I decided something had to be done to make prospecting equipment more "user friendly".  The high cost of replacement equipment made me realize that it was prohibitive for families, seniors, and many others who wanted to get into prospecting. 

    This is a hobby I thoroughly enjoy, and knowing that the more people doing it makes it better for all of us, I decided to build an affordable, user friendly drywasher. It could not be just any drywasher, My drywasher is:
 
A. Affordable. I saw other units selling for $450.00 to $1,000.00, and after careful consideration I knew I could improve quality and lower cost.
B. Very convenient for the operator.
1. Special chain to hang the riffle board from to keep it from falling down and banging knuckles during clean out.
2. Quick and easy set up and tear down. Takes about a minute or less.
3. Automatic clean out.
a. Set pan under box between legs.
b. Lift riffle board and hook it to "S" hook on chain.
c. Start leaf blower at an idle, hold screen with one finger, and watch concentrates run right into your pan.
C. Light weight and back packable.
1. 28# total weight.
2. Legs scissor together into one unit for easy transport so they can be carried with one hand.
3. When backpacking, legs slide conveniently over hopper.
D. All steel parts are powder coated.
1. Scratch resistant.
2. Rust proofing.
E. Compact.
1. Folds into 18x18x24 inches so it can be carried with one hand by using the bar through the open end of the hopper as a handle.
2. The chain that is used to hold the riffle board up now works as a latch to hold the unit together like a suitcase. ( Make sure "S" hook goes from inside to outside or it will come unlatched )
3. Easily stored and handled. Fits well in the trunk of a car.
F. All aluminum hopper for smooth, stedy dirt flow.
G. Adjustable latch so if  foam under riffle board shrinks, latch can be ajusted for a tight fit.
H. Very high gold recovery rate!
1. After studying other drywashers, both constant flow and puffer units, I realized both had their advantages. By intergrating a 3-axis shake, rather than the conventional 2-axis shake, I combined the attributes of both. This is accomplished by setting the fan at a slight angle from the box so as to give plus and minus shake from from side to side, end to end and up and down.
2. With the 3-axis shake, gold is driven down into the riffles and has no chance to escape, so the drywasher will not lose the gold if you choose to work down your concentrates with no additional flow from the hopper.
As you can see, a lot of thought and effort has gone into the design and building of this drywasher.

IT IS THE MOST CONVENIENT DRYWASHER ON THE MARKET TODAY!

IT IS THE BEST DRYWASHER AT ANY PRICE!

At this time I only have one model available, but I have new ideas and other products will soon be in the works.